Bi-Axial Damper Test System)
Bi-Axial test rig for MEMs (Multilayered Elatormeric Modules) used for developmental testing and quality assurance of elastomeric interfaces used in the launch vehicles. These elastomers in applications are sandwiched in such a way they transfer the thrust and also isolate the solid rocket motor thrust oscillations. The biaxial systems characterize vibration response at frequencies ranging from 0 to 70 Hz, displacements ranging from 0.05 to 15 mm, forces ranging from 0 to 600 kN in dynamic condition and 0-2000kN in static condition. |
Applications: Biaxial static and dynamic testing of Launch Vehicle Thrust Damper: • Static shear test-unconstrained |
Features:
• Fully integrated single footprint system |
Specification
Loadframe Capacity, kN | 2000 kN |
Frequency Range, Hz | 0.01 to 70 |
Actuator Capacity, kN | 1x 2000 kN, 1 x 600 kN dynamic loading, 2 x 1000 kN side actuators |
Hydraulic Power Pack | 1250 LPM flow ( 5 x 250 LPM) at 210 bar pressure |
Power | 440 V 3-phases, 3 фазы, 600 kW rating |
Controls | Full digital control using Digital Signal Processor with 8 KHz servo-loop update and data acquisition. 48 channels of Data acquisition, Adaptive control for stroking precision. All controls housed in dust free air conditioned enclosure. |