SP-02-03XX Ball Joint Test Rig 

BiSS Ball Joint Test System for durability and performance evaluation of ball joint system by subjecting the specimen to tilt, rotation and axial loads.Servo torque motor,servo hydraulic linear actuators, customized grips, fixtures, and transducers simulate the real test conditions with BiSS 2370MS controller

Applications (as per JASO C 715, SAE J 193 and SAE J 1367):


  • Oscillation angle test
  • Torque test
  • Rigidity test
  • Extrusion and drawing strength test
  • Ball stud static strength test
  • Fatigue strength test
  • Service temperature abrasive durability test
  • Muddy water durability test
  • Dust cover Ozone deterioration, low temperature and heat resistance test
  • Optional testing under cold temperatures up to -400C
  • Optional testing under hot temperatures up to 2000C

  Standard features (customized options available):

  • Two 50 kN, +/-150 mm linear actuators
  • 5kN*m servo hydraulic rotary actuator
  • Suitable for static and dynamic testing
  • 2370MS digital controls for synchronous multi-axis control and acquisition
  • “Green” highly efficient hydraulic powerpack

 Optional features:

  • Environmental chambers
  • Muddy water system

Ball Joint Test System

Download Catalog on Automotive Test Systems

 

Specification:
Rotary actuator Torque: 5 kN*m
Angular displacement: +/- 500
Includes 5 kN*m torque cell and suitable digital position encoder
Linear actuators (2 Nos) Double acting double ended +/- 50 kN force rating and +/-150 mm stroke.  
Includes axial load cell of 50 kN and suitable position measurement LVDT.
2370MS Controller  Control channels: 3 channel of servo control 
Input channels: 6
Performance: Typical servo-loop update and DAQ frequency up to 5 kHz
Hydraulic powerpack Digital servo-control with flow of up to 200 LPM
Operating pressure: up to 210 bar
Power consumption: 10 to 80kVA through “flow on demand” servo control
Environmental Chamber (Optional)

Size: 1000 mm x 500 mm x 500 mm (internal)
Temperature range: -400C to 2000C
Accuracy: +/- 10C
Muddy water (Optional) Rate of spray: 4 LPM
Tank capacity: 70 L
Total weight of rig 2.5 t
Foot print L X W X H = 2.5  x 1.3  x 1.5 m

*Custom options available

Go to top