BiSS CV Joint Test System for constant velocity testing as per SAE J 2028. The test setup evaluates the quality of CV joints by simulating the actual movements as in automobiles with BiSS 2370MS controller.
The two mounting blocks bolted on the frame support a hydraulic motor and a torque load cell coupled with transducers for precision measurement and customized grips to hold the test specimen. The mounting blocks have provision to rotate (+/-45 degrees) and also to move to and fro adjusting to the varying lengths of specimen.
Applications (as per SAE J 2028): • Articulation torque test to measure the torque required to rotate the shaft, when articulated at any point between 0 to 500 Optional features: • Environmental chambers |
Specification | |
Actuator | Torque: 1.5 kNm Speed: 1500 rpm Includes torque cell, 1.5 kNm and suitable digital position encoder |
2370MS Controller | Control channels: 1 channel of servo control Input channels: 2 Performance: typical servo-loop update and DAQ frequency up to 5 kHz |
Hydraulic power pack | Digital servo-control with flow of up to 200 LPM Operating pressure: up to 210 bar Power consumption: 10 to 80 kVA through "flow on demand" servo control |
Environment chamber (Optional) | Dimensions: 1000 x 500 x 500 mm Temperature range: -400C to 2000C Accuracy: +/- 10C Average rate of rise /fall with load: 10C/min over entire range |
Weight | 1.5 tonnes |
Dimensions | L x W x H = 2.5 X 1 X 1.2 m |
*Custom options available