Uno Test System

Uno Servo-Hydraulic Testing Machine

UT-03-XXXX Uno are single footprint fully integrated test systems in the range of 50 to 600 kN. These test systems cater to mechanical testing requirements of strength, fatigue and fracture. The test system configuration features a 2 column loadframe with provision to mount loadcell on movable top crosshead and a fixed bottom crosshead with provision to mount actuator on to it. The loadframe is supported on a base frame that encloses a digital servo controller and a 4 lpm powerpack. These stand alone systems require no site preparation and no special utilities like water cooling or even 3 phase supply, just plug into the closest 15 A mains socket and the system is ready for use. 

Standard features:

 • Capacity: 50/100/150/200/250/300/500/600 kN
 • Stroke: 100 to 150 mm 
 • Cycling frequency: up to 10 Hz
 • Frame stiffness: 600 kN/mm
 • Energy efficient power packs
 • Hydraulics lifts and clamps
 • Open architecture hardware and software

Applications:

• Tension/Compression/3-point bend
• Low/High cycle fatigue (LCF/HCF)
• Fatigue crack propagation
• Ductile/Brittle fracture
• Fracture mechanics 
• Threshold stress intensity
• Low/High temperature tests

Specification

 Model Uno 50 Uno 100 Uno 150 Uno 200 Uno 250 Uno 300 Uno 500 Uno 600
 Model No. UT-03-0050 UT-03-0100 UT-03-0150 UT-03-0200 UT-03-0250 UT-03-0300 UT-03-0500 UT-03-0600
 Capacity, kN 50 100 150 200 250 300 500 600
 No. of columns 2
 Column clearance, mm
 600/650
 Maximum vertical daylight, mm 1200/1500
 Total Weight, kg 1000 1800 2500
 Load accuracy +/-0.5% of readout down to 1/500th of capacity

*Custom options available

 

Download brochure for Uno Test System 

Go to top